• What is the BLINK network?

    BLINK is the RF protocol that locks our system together. It’s how our products communicate with each other and how timecode, metadata and control commands travel between units.

    • BLINK RF powers the robust, wireless communication network driving our system.
    • Creates a reliable wireless link between multiple timecode units over uncongested sub-GHz ISM bands
    • Unlocks the ability to sync, monitor and remote control multiple Timecode Systems devices and any compatible cameras and audio equipment via the BLINK Hub app
    • Enables remote monitoring and control up to 500m (line of sight)

    Background information:

    When we first developed BLINK, it’s primary purpose was to share timecode and genlock one-way between units. This remains a core function. By selecting the same RF channel on each timecode device, this locks all receiving timecode units with a master. This allows the flow of timecode and metadata between multiple video and audio sources on set, creating a robust, consistent and reliable sync.

    We realised we could make better use of the bandwidth by multiplexing two-way communication in between the sync data. This allows our customers to not only gather and share timecode wirelessly, but also remotely view the status and adjust the settings of all Timecode Systems devices on the network. You can monitor all connected devices up to distances of 500m (line of sight).

    We developed the BLINK Hub app to add the capability to wirelessly control (as well as synchronise) the cameras and sound equipment our products are attached to, all from a single screen. This includes bespoke BLINK enabled solutions for Sound Devices 6-Series mixer/recorders and GoPro HERO4 Black and Silver cameras.

    With the Version 4 firmware update, we’ve updated BLINK to allow all units to be assigned a ‘BLINK Master ID’. This enables all receiving timecode sources to be grouped with a specific master. So if you’re filming in an environment where there are multiple crews shooting (and therefore potentially multiple master units operating within range), you can be assured that you’re receiving units are syncing with the correct master.



  • Installing BlinkHub on an android phone or tablet

    On your android phone or tablet open the "play store", use the search feature to locate the "Blink Hub" app. Select the app pulished by Timecode Systems Ltd and click "install".

    It is that simple, the app once installed is ready to use.

    Be aware that to make use of this app you will need to connect via wifi to your pulse master. All other devices that you wish to monitor/control will need to be connected to the pulse.