Now your Denecke TS-TCB: Slate hardware is up and running, it’s time to download the Timecode Buddy: app. Our iOS app is free to download from the Apple app store.

• Turn on the Wi-Fi of your Denecke TS-TCB Slate.
• When the Denecke TS-TCB Slate displays ‘Wi-Fi Ready’, open the Wi-Fi settings page on your iOS device.
• Select the WiFi network of the Denecke TS-TCB Slate. ie. Slate027
• Open your Timecode Buddy: app. This should now show the running timecode from your Denecke TS-TCB: Slate. The screen graphics will change to reflect connection to the slate.

If you want to remotely change any of the Device settings via the app, press settings, type in the four-digit passcode (set on the systems menu of your Device) then make changes directly from the app.

 

The TS-TCB web view will open in any browser.

Three simple steps activate this feature:

1. Turn on Slate Wi-Fi and choose Soft AP mode. Wait until display flashes ‘Wi-Fi Ready.’
2. Take any Wi-Fi enabled device with a browser and scan wireless networks for ‘Slatexxx’.
3. When connected, type the IP address of your Denecke TS-TCB: Slate into the address bar of the browser e.g. 169.254.xxx.1 (xxx is the number of the Slate chosen).

If you are connected to the Timecode Buddy: app or the Movieslate app then Timecode Buddy: web view is available from a quick launch button directly from app.

If you want to remotely change any of the Device settings via the app, press settings, type in the four-digit passcode (set on the systems menu of your Device) then make changes directly from the app.

 

Webview capability

• Show the Denecke TS-TCB: The Slate you’re connected to.
• Access Slate settings: Displays status and settings of the Denecke TS-TCB: Slate.
• Configure Wi-Fi: Scan for available wireless networks, type in the network key, and join an infrastructurenetwork for firmware updates to the Denecke TS-TCB: Slate.