Using the MAVIS app you can pair your UltraSync BLUE with your iPhone to embed timecode in the footage captured by the MAVIS app.
If you have already purchased an UltraSync BLUE you can redeem the MAVIS timecode pack for free. You can claim one timecode pack per UltraSync BLUE serial number.
UltraSync BLUE
Redeeming Timecode Pack with UltraSync BLUE
If you’ve already purchased an UltraSync BLUE, you can redeem your free timecode pack from the MAVIS store.
1) Tap on the settings icon at the top left of the screen.
2) Tap the button at the top to load the MAVIS store.
3) Tap Timecode product tile to load the timecode product page.
4) Scroll down and tap "Redeem Timecode pack using UltraSync BLUE" button.
5) Turn on the UltraSync BLUE.
- Press the select button.
- Click the select button again to 'run' the device.
- Click the select button to 'confirm above'.
- You should now see timecode on the LED screen.
6) Enter Bluetooth Pair.
- Click the select button to access the main menu.
- Click the down button to go to Bluetooth Pair and click the select button to select it.
7) Ensure UltraSync BLUE is <Searching>
8) When UltraSync BLUE shows <Searching>, tap on the popup within MAVIS to continue process.
9) MAVIS will look for the UltraSync BLUE serial number.
10) When the serial is found, a free in-app purchase process will start. You may be asked to enter your iTunes store password.
11) After successfully redeeming the timecode pack, please register your UltraSync BLUE.
Syncing MAVIS with an UltraSync BLUE
1) Tap on the Settings icon at the top left of the screen.
2) Tap on Timecode within the RECORDING section.
3) Tap on UltraSync BLUE. MAVIS is now searching for the UltraSync BLUE.
4) Turn on the UltraSync BLUE.
- Press the select button.
- Click the select button again to 'run' the device.
- Click the select button to 'confirm above'.
- You should now see timecode on the LED screen.
5) Enter Bluetooth Pair.
- Click the select button to access the main menu.
- Click the down button to go to Bluetooth Pair and click the select button to select it.
6) Wait for MAVIS device to be found.
7) Select your MAVIS device.
- Click the select button to select device.
- Click the select button to 'confirm above'.
8) MAVIS is now paired to the UltraSync BLUE and timecode will run in sync!
