How do I use BLINK Hub with my SyncBac PRO?

Did you know that you can monitor and control your SyncBac PRO and GoPro HERO remotely, via a tablet or desktop PC or Mac? All you need is a Timecode Systems :pulse in your RF network and the free BLINK Hub application. When a network has remote monitoring and control capabilities, we call it a BLINK network (it is an RF network with remote features provided by BLINK Hub and a :pulse).

Nexus_6_MockUp_by_Litvin_Vladislav_454x229.png

In BLINK Hub, each device in the BLINK network has its own status panel. The status panel shows a variety of status information about the device and its attachments. So you can view the status of your SyncBac PROs and the GoPro HERO cameras to which they are connected.

Even better, you can use BLINK Hub for remote control. With a :pulse as the master, you can switch slaves on and off and start and stop recordings from your desktop, tablet or smartphone. To control a SyncBac PRO remotely, it must be set to run in RF Slave mode, and a :pulse must be set as the master (see Set the Timecode Mode).

For instructions on how to use BLINK Hub, please refer to the BLINK Hub documentation, which is provided with :pulse mini-base stations.

Tip: Visit www.timecodesystems.com or contact your local stockist for more information on :pulse mini base stations.

 

Powered by Zendesk