Free Run - UltraSync BLUE

If you want to use your UltraSync BLUE as a standalone device, set it to use Free Run mode. In this mode, your UltraSync BLUE will provide timecode to your recording devices via Bluetooth, but radio (RF) is turned off. This means it will not sync with other Timecode Systems products (and it uses less battery power as RF is not used).

free-run_566x216.png

To get your UltraSync BLUE to free run:

  1. Set the UltraSync BLUE to run in Free Run mode.
  2. Set the timecode and frame rate for the UltraSync BLUE.
  3. Pair the UltraSync BLUE with the recording devices.

 

Powered by Zendesk