Change the LED Brightness - SyncBac PRO

You can set your SyncBac PRO so that its LED is more/less bright, depending on your requirements.

To change the LED brightness:

  1. Switch on your SyncBac PRO (see Switch SyncBac PRO On and Off).

  2. Press the Select button.
  3. Use the Up and Down buttons to scroll to the System Settings option.

  4. Press the Select button.
  5. Use the Up and Down buttons to scroll to the Set LED Brightness option.
  6. Press the Select button.
  7. Use the Up and Down buttons to change the value. The brightness range is 1 to 5, where 1 is the dullest and 5 is the brightest.
  8. Press the Select button to confirm.

Powered by Zendesk