Button Lock - SyncBac PRO

In some situations, you may find that your SyncBac PRO's control buttons are pressed accidentally, which can affect the settings. For example, if you are a skier and you are wearing your SyncBac PRO and GoPro HERO, you may find that your clothing or body knocks into the controls as you move. To prevent these accidental button presses from affecting your SyncBac PRO, you can turn on the Button Lock.

With the Button Lock enabled, any accidental presses of the Select button will have no effect. To get into the menus when Button Lock is enabled, you first have to manually deactivate the lock.

  1. Display the Main Screen.

  2. Use the Up and Down buttons to scroll to the screen that shows Button Lock: at the top.


    The Button Lock screen will present you with one of two messsages:

    • Press to Lock - This message is shown if Button Lock is currently disabled. if you press the Select button, Button Lock will be enabled. SyncBac PRO will not allow you to access the menu options again until the Button Lock has been disabled.
    • Press to Un-Lock - This message is only shown if Button Lock is currently enabled. If you press the Select button, Button Lock will be disabled. You will be able to access the menus again by pressing the Select button.
  3. Press the Select button to confirm.

Powered by Zendesk