Switch SyncBac PRO On and Off

To switch your SyncBac PRO on:

  1. Press and hold the Select button. Keep the button pressed down.


    syncbac-select-button.svg

    The SyncBac PRO screen lights up and displays the message:

    Push Up/Dn twice to switch on

  2. Press the up or down button twice to turn on the SyncBac PRO. This extra step is designed to prevent you from accidentally turning the SyncBac PRO on. If you do not press the up or down button twice within a 5 second period, the SyncBac PRO stays off.

When the SyncBac PRO comes on, it shows the main screen by default (see Display and Controls).

Note: If your SyncBac PRO does not come on when you press and hold the Select button, the battery may need to be charged (see Charging your SyncBac PRO). The LED lights red when the battery charge is running out.

 

To switch your SyncBac PRO off:

  1. Press and hold the Select button. Keep the button pressed down. A countdown appears on the screen:

    Shutting down in 3

  2. Keep the button pressed down until the countdown is finished and the following message is displayed:

    Push Up/Dn twice to switch off

  3. Press the Up or Down button twice to turn off the SyncBac PRO. This extra step is designed to prevent you from accidentally turning the SyncBac PRO off. If you do not press the up or down button twice within a 5 second period, the SyncBac PRO stays on and the screen reverts to showing the main display.

 

Tip: If your SyncBac PRO is connected to a GoPro HERO and is a slave of a :pulse, you can use the BLINK Hub app to turn the HERO on and off remotely. This is a great way to save battery power.

Powered by Zendesk