Set Up Ethernet for Data Streaming
If your setup makes it easy to position a computer close to your :pulse, you may prefer to use an Ethernet connection instead of Wi-Fi. An Ethernet connection is stable and constant, and is not affected by other devices.
If you want to use an Ethernet cable for communications between your :pulse and external apps:
- Install the external apps on your computer.
- Connect an Ethernet cable to one of the Ethernet ports on your :pulse and the Ethernet port on your computer.
-
Switch on your :pulse unit (see Switch :pulse On and Off).
-
Press the control knob.
- Turn the control knob to scroll to the Ethernet Settings option.
-
Press the control knob.
- Turn the control knob to scroll to the Turn On/Off option.
-
Press the control knob.
- Turn the control knob to select the appropriate option:
- Turn on to enable Ethernet.
- Turn off to disable Ethernet.
-
Press the control knob to confirm your selection.
Your :pulse can now send and receive data via Ethernet. To connect to the external apps, some additional setup may be required in the applications.