Change the Screen Light Time - SyncBac PRO

By default, the SyncBac PRO's screen is lit at the set brightness level all of the time. This makes it easier to read the display, but uses up more battery power. If you want to reduce the use of battery power, or just prefer the screen to dim after a short amount of time, you should change the Display Settings.

  1. Connect your SyncBac PRO to a HERO4™ (if it is not connected already). For further details, see Connect SyncBac PRO to a GoPro HERO4™.

  2. If your SyncBac PRO is currently off, switch it on (see To switch your SyncBac PRO on:).

  3. Press the Select button.

  4. Use the Up and Down buttons to scroll to Display Settings.

  5. Press the Select button.

  6. Use the Up and Down buttons to scroll to your preferred screen light display time:
    • Always on to have the screen lit all of the time.
    • Short timed on to have the screen lit for approximately 10 seconds after the last press of the Up, Down, or Select button. The screen will dim as long as you don't press any of the buttons.
    • Long timed on to have the screen lit for approximately 20 seconds after the last press of the Up, Down, or Select button. The screen will dim as long as you don't press any of the buttons.

    Note: As soon as you press the Up, Down, or Select button, the dim timer is reset.

  7. Press the Select button to confirm.
Powered by Zendesk