SyncBac PRO Display and Controls

SyncBac PRO Front Overview

 

OLED Display

The OLED display is a blue 128 × 32 pixels screen. When you switch on the SyncBac PRO, all status information, messages, and menus and options are shown on this screen.

To learn about the various status displays, including the 'Main' screen shown above, see Main Screen.

 

LED

The LED to the right of the OLED display acts as a colour-coded status indicator.

Colour Description
Green

If the SyncBac PRO is switched on and set to run as an RF slave, a green light indicates that the SyncBac PRO is communicating with a master device. Its clock is synchronised with the clock in a master device.

If the SyncBac PRO is switched off, the green light indicates that the battery is fully charged.

Blue

A blue light indicates that the SyncBac PRO has been synchronised with a master device but is currently 'free running'. It has lost its connection with the master and is using its own highly accurate internal clock. When the master is back in range, the SyncBac PRO will attempt to reconnect and re-synchronise.

A flashing blue light means that the SyncBac PRO is in the process of synchronising with a master.

Red

If the SyncBac PRO is switched on, a red light indicates a warning message is displayed on screen or that the battery power is low.

If you are unfamiliar with master and slave devices, you can learn more in the following sections:

 

Up and Down

Use the Up and Down buttons to scroll through the menus and menu options, and also to scroll through the status displays.

Select

Use the Select button to choose a menu or option. You will also use Select to switch your SyncBac PRO on and off.

To make a selection, use the Up and Down buttons to scroll to a menu or option and then press the Select button once.

To switch your SyncBac PRO on or off, press and hold the Select button (see To switch your SyncBac PRO on:, for more details).

Powered by Zendesk