Set the RF Country/Area - UltraSync ONE

Set the RF Country/Area

Your UltraSync ONE can communicate with other devices via radio (RF). Before you use your UltraSync ONE, you need to set it to use the correct radio frequencies for your region. This is because the regulations for the use of radio frequencies vary in different countries.

Note: The RF Country/Area setting does not apply to units sold in North America and Canada. If you purchased your UltraSync ONE in the US or Canada and wish to use it in another country, please contact Timecode Systems. We can provide you with a free updater application that will allow you to set the country/area.

To set the RF country/area:

  1. Make sure your UltraSync ONE is switched on (see Switch UltraSync ONE On and Off).

  2. Press the Select button.
  3. Use the Up and Down buttons to scroll to the System Settings option.

  4. Press the Select button.
  5. Use the Up and Down buttons to scroll to the Set RF Country/Area option.
  6. Press the Select button.
  7. Use the Up and Down buttons to select the appropriate area:
    • Europe/UK
    • Japan/China
    • US/CA/AU/NZ (for USA, Canada, Australia, or New Zealand).
  8. Press the Select button to confirm. Your UltraSync ONE will now communicate using radio frequencies that are appropriate for the region you selected.

Tip: You can see which country/area your UltraSync ONE is set to use by looking at the main status screen (see Main Screen). In the bottom-right corner, the country/area is shown next to the channel (CE for Europe, JP for Japan/Asia, and FC for USA, Canada, Australia, and New Zealand).

Powered by Zendesk