Master to Wired Device Only, No RF Slaves

If you want your UltraSync ONE to only provide timecode to devices that are wired to the UltraSync ONE:

1. Connect your camera or sound mixer/recorder to your UltraSync ONE.

   If you want your UltraSync ONE to provide timecode via the LTC port, connect your device to the LTC port. Use the blue DIN 1.0/2.3 to BNC cable that is supplied with your UltraSync ONE.

   If you want your UltraSync ONE to provide timecode via the SYNC port, connect your device to the SYNC output port. Use the red DIN 1.0/2.3 to BNC cable that is supplied with your UltraSync ONE.

   If you want your UltraSync ONE to provide genlock or word clock signals to your device, connect your device to the SYNC output port. Use the red DIN 1.0/2.3 to BNC cable that is supplied with your UltraSync ONE.

2. Make sure your UltraSync ONE is switched on (see Switch UltraSync ONE On and Off).

3. Press the Select button.

4. Set the Timecode Mode to Master TX.
5. If you want your UltraSync ONE to output genlock, word clock, or timecode via the SYNC port, set the appropriate SYNC O/P Mode (see Set the SYNC Output). If you are not using the SYNC output, ignore this step.

6. Use the Set Timecode option to set the clock for your master UltraSync ONE Set the Timecode for the Master.

7. Use the Set FPS Rate option to set the frames-per-second rate to match the FPS of the connected device (see Set the Frame Rate Per Second).
8. Use the Local or EXT U/B option to set your UltraSync ONE to use either local user bits or external user bits (see Set the User Bits). If you choose local user bits, you will also need to set the user bits.

9. Set the output level for the port that is used for the wired connection to your external device. You need to set the level so that the voltage of the signal is appropriate for your device. For more details, see:

   • Set the SYNC Output
   • Set the LTC Level.

Your UltraSync ONE will send timecode, FPS, and user bits data (and possibly word clock or genlock, depending on your selections) to the wired devices. The wired devices receive the data and synchronise with your master UltraSync ONE.

See also:

• Master and Slaves
• Master TX