1. Timecode Systems
  2. FAQs
  3. :wave

  • The dial won't function on my Wave unit, what can I do?

    If the main dial is unresponsive and does not allow you to alter the settings on your unit, there could be an issue with the dial itself. 

    First of all, try taking the plastic cap off the dial and continue to use the unit without it. 

    If this is method is unsuccessful, your unit would need to be assessed and potentially repaired by Timecode Systems. Please contact our support team: support@timecodesystems.com to submit a ticket. 

  • What are the pins used for in the Pulse and Wave?

    Lemo 2:

    Pin 1 – Ground

    Pin 2 – Power In (9-36V)

     

    Lemo 5:

    Pin 1 – Ground

    Pin 2 – LTC In/Out (it depends of the mode, it can be both: input or output)

    Pin 3 – Not in use

    Pin 4 – Power In (9-36V)

    Pin 5 – LTC Out

     

    Lemo 9:

    Pin 1 – Ground

    Pin 2 – LTC In/Out (it depends of the mode, it can be both: input or output)

    Pin 3 – Not in use

    Pin 5 – RX+ RS422

    Pin 6 – RX- RS422

    Pin 7 – TX+ RS422

    Pin 8 – TX- RS422

    Pin 9 – Not in use